Vegetation response to hydrologic and geomorphic factors in an arid region of the Baja California Peninsula

Remotely sensed imageries were used to analyze the response of desert vegetation to physiographic factors and accumulated precipitation in drier and wetter years within a region of >16,500 km² sampled with 5,000 random pixels of 30 m. Vegetation development was indexed by the annual maximum values for greenness (SAVI) and canopy water content (NDII). Precipitation was interpolated from the 0.25° grid of the Tropical Rainfall Measurement Mission satellite-based estimates, showing a regional average of ～55 mm in the wetter year. The vegetation indices were only weakly related to total precipitation, often in a negative sense. Terrain factors that most often affected the vegetation indices, in multiple regression models, were Topographic Wetness Index, elevation, and slope gradient; these often had different signs for SAVI and for NDII. Models for NDII on intrusive igneous rocks gave better results than on extrusive igneous rocks. The strongest patterns in vegetation development were the contrast among Pacific coast, Cordillera, and Gulf coast subregions and the generally stronger results for NDII than SAVI.     

Spatial and temporal variability of metals in inter-tidal beach sediment of Mumbai, India

Nine metals were monitored in the beach sediment in Mumbai from May 2011 to March 2012 to evaluate the spatial and temporal distributions. The average heavy metal concentrations exhibited the following order: Fe > Mn > Cr > Co > Ni > Pb > Zn > Cu > Cd for the four sampling sites. The mean concentrations (± SD) of Fe, Mn, Cr, Co, Ni, Pb, Zn, Cu and Cd were estimated to be 31.15?±?10.02 g kg^?1, 535.04?±?76.42, 151.98?±?97.90, 92.76?±?14.18, 67.52?±?11.32, 59.57?±?15.19, 54.65?±?15.01, 32.24?±?8.07 and 18.75?±?1.76 mg kg^?1, respectively. The results indicated that the sediments were polluted with Cd, Cr, Co and Pb due to high anthropogenic influences. Spatial variation of metals revealed that most of the metals were high in Dadar beach and low in Aksa beach. Cd was the highest contaminant metal studied with a mean contamination factor of 93.75. The pollution load indices of the studied beaches ranged from 1.63 (Aksa) to 1.91 (Dadar) and indicated that the beach sediments were polluted with heavy metals. The heavy metal contents increased in relation to monsoon, and most of the heavy metals showed significantly high concentrations in November during the post-monsoon. The statistical analysis revealed significant effect of study site on all the metals studied. Further, there was a significant difference on metal accumulation on bimonthly basis in relation to weather pattern in Mumbai beaches.     

Urinary 8-oxo-7, 8-dihydro-2′-deoxyguanosine concentrations after frying of bacon,a pilot study

Cooking fumes contain compounds that may give rise to oxidative stress and mutations when inhaled. The aim of this study was to evaluate if cooking fumes from frying of bacon induce oxidative stress by measurement of urinary 8-oxo-7,8-dihydro-2 deoxyguanosine, a marker of oxidatively damaged DNA. Three non-smoking women fried bacon for 3 h. Urine samples were taken as early morning void at the same time on four days; the morning before frying, the morning after first frying, the morning after three days of frying and one week after first urine sample. 8-Oxo-7,8-dihydro-2 deoxyguanosine, 1-hydroxypyrene and 2-hydroxyphenanthrene, metabolites of polycyclic aromatic hydrocarbons, were measured by liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS). 8-Oxo-7,8-dihydro-2 deoxyguanosine correlated weakly with concentrations of 1-hydroxypyrene (r = 0.31, p = 0.042), but it did not correlate with 2-hydroxyphenanthrene (r = ?0.074; p = 0.64). Average urinary 8-oxo-7,8-dihydro-2 deoxyguanosine concentrations increased from the day before frying (16.3 ± 4.2 nmol/L) to the third day of frying (26.2 ± 10.2 nmol/L), although not statistically significantly. Our pilot study shows that frying of bacon may result in increased oxidative stress which further emphasises the possible carcinogenic potential of cooking fumes.     

Developmental toxicity of PAH mixtures in fish early life stages. Part II: adverse effects in Japanese medaka

In aquatic environments, polycyclic aromatic hydrocarbons (PAHs) mostly occur as complex mixtures, for which risk assessment remains problematic. To better understand the effects of PAH mixture toxicity on fish early life stages, this study compared the developmental toxicity of three PAH complex mixtures. These mixtures were extracted from a PAH-contaminated sediment (Seine estuary, France) and two oils (Arabian Light and Erika). For each fraction, artificial sediment was spiked at three different environmental concentrations roughly equivalent to 0.5, 4, and 10 μg total PAH g^?1 dw. Japanese medaka embryos were incubated on these PAH-spiked sediments throughout their development, right up until hatching. Several endpoints were recorded at different developmental stages, including acute endpoints, morphological abnormalities, larvae locomotion, and genotoxicity (comet and micronucleus assays). The three PAH fractions delayed hatching, induced developmental abnormalities, disrupted larvae swimming activity, and damaged DNA at environmental concentrations. Differences in toxicity levels, likely related to differences in PAH proportions, were highlighted between fractions. The Arabian Light and Erika petrogenic fractions, containing a high proportion of alkylated PAHs and low molecular weight PAHs, were more toxic to Japanese medaka early life stages than the pyrolytic fraction. This was not supported by the toxic equivalency approach, which appeared unsuitable for assessing the toxicity of the three PAH fractions to fish early life stages. This study highlights the potential risks posed by environmental mixtures of alkylated and low molecular weight PAHs to early stages of fish development.     

Can ornamental potted plants remove volatile organic compounds from indoor air? — a review

Volatile organic compounds (VOCs) are found in indoor air, and many of these can affect human health (e.g. formaldehyde and benzene are carcinogenic). Plants affect the levels of VOCs in indoor environments, thus they represent a potential green solution for improving indoor air quality that at the same time can improve human health. This article reviews scientific studies of plants’ ability to remove VOCs from indoor air. The focus of the review is on pathways of VOC removal by the plants and factors affecting the efficiency and rate of VOC removal by plants. Laboratory based studies indicate that plant induced removal of VOCs is a combination of direct (e.g. absorption) and indirect (e.g. biotransformation by microorganisms) mechanisms. They also demonstrate that plants’ rate of reducing the level of VOCs is influenced by a number of factors such as plant species, light intensity and VOC concentration. For instance, an increase in light intensity has in some studies been shown to lead to an increase in removal of a pollutant. Studies conducted in real-life settings such as offices and homes are few and show mixed results.     

Electrooxidation of industrial wastewater containing 1,4-dioxane in the presence of different salts

The treatment of 1,4-dioxane solution by electrochemical oxidation on boron-doped diamond was studied using a central composite design and the response surface methodology to investigate the use of SO₄ ^2? and HCO₃ ^? as supporting electrolytes considering the applied electric current, initial chemical oxygen demand (COD) value, and treatment time. Two industrial effluents containing bicarbonate alkalinity, one just carrying 1,4-dioxane (S1), and another one including 1,4-dioxane and 2-methyl-1,3-dioxolane (S2), were treated under optimized conditions and subsequently subjected to biodegradability assays with a Pseudomonas putida culture. Electrooxidation was compared with ozone oxidation (O₃) and its combination with hydrogen peroxide (O₃/H₂O₂). Regarding the experimental design, the optimal compromise for maximum COD removal at minimum energy consumption was shown at the maximum tested concentrations of SO₄ ^2? and HCO₃ ^? (41.6 and 32.8 mEq L^?1, respectively) and the maximum selected initial COD (750 mg L^?1), applying a current density of 11.9 mA cm^?2 for 3.8 h. Up to 98 % of the COD was removed in the electrooxidation treatment of S1 effluent using 114 kWh per kg of removed COD and about 91 % of the COD from S2 wastewater applying 49 kWh per kg of removed COD. The optimal biodegradability enhancement was achieved after 1 h of electrooxidation treatment. In comparison with O₃ and O₃/H₂O₂ alternatives, electrochemical oxidation achieved the fastest degradation rate per oxidant consumption unit, and it also resulted to be the most economical treatment in terms of energy consumption and price per unit of removed COD.     

Effectiveness of rodenticides for managing invasive roof rats and native deer mice in orchards

Roof rats (Rattus rattus) and deer mice (Peromyscus maniculatus) are occasional pests of nut and tree fruit orchards throughout California and in many other parts of the USA and beyond. In general, the most practical and cost-effective control method for rodents in many agricultural environments is the use of rodenticides (toxic baits), but little or no information exists on the efficacy of current rodenticides in controlling roof rats and deer mice in orchards. Therefore, our goals were to develop an index of rodent activity to monitor efficacy of rodenticides and to subsequently test the efficacy of three California Department of Food and Agriculture rodenticide baits (0.005 % chlorophacinone treated oats, 0.005 % diphacinone treated oats, and 0.005 % diphacinone wax block) to determine their utility for controlling roof rats and deer mice in agricultural orchards. We determined that a general index using the number of roof rat photos taken at a minimum of a 5-min interval was strongly correlated to the minimum number known estimate of roof rats; this approach was used to monitor roof rat and deer mouse populations pre- and post-treatment. Of the baits tested, the 0.005 % diphacinone treated oats was most effective for both species; 0.005 % chlorophacinone grain was completely ineffective against roof rats. Our use of elevated bait stations proved effective at providing bait to target species and should substantially limit access to rodenticides by many non-target species.     

Increased bioavailability of metals in two contrasting agricultural soils treated with waste wood-derived biochar and ash

Recycled waste wood is being increasingly used for energy production; however, organic and metal contaminants in by-products produced from the combustion/pyrolysis residue may pose a significant environmental risk if they are disposed of to land. Here we conducted a study to evaluate if highly polluted biochar (from pyrolysis) and ash (from incineration) derived from Cu-based preservative-treated wood led to different metal (e.g., Cu, As, Ni, Cd, Pb, and Zn) bioavailability and accumulation in sunflower (Helianthus annuus L.). In a pot experiment, biochar at a common rate of 2 % w/w, corresponding to ～50 t ha^?1, and an equivalent pre-combustion dose of wood ash (0.2 % w/w) were added to a Eutric Cambisol (pH 6.02) and a Haplic Podzol (pH 4.95), respectively. Both amendments initially raised soil pH, although this effect was relatively short-term, with pH returning close to the unamended control within about 7 weeks. The addition of both amendments resulted in an exceedance of soil Cu statutory limit, together with a significant increase of Cu and plant nutrient (e.g., K) bioavailability. The metal-sorbing capacity of the biochar, and the temporary increase in soil pH caused by adding the ash and biochar were insufficient to offset the amount of free metal released into solution. Sunflower plants were negatively affected by the addition of metal-treated wood-derived biochar and led to elevated concentration of metals in plant tissue, and reduced above- and below-ground biomass, while sunflower did not grow at all in the Haplic Podzol. Biochar and ash derived from wood treated with Cu-based preservatives can lead to extremely high Cu concentrations in soil and negatively affect plant growth. Identifying sources of contaminated wood in waste stream feedstocks is crucial before large-scale application of biochar or wood ash to soil is considered.     

Identification and source apportionment of polycyclic aromatic hydrocarbons in ambient air particulate matter of Riyadh, Saudi Arabia

In an effort to assess the occurrence and sources of polycyclic aromatic hydrocarbons (PAHs) in the ambient air of Riyadh, Saudi Arabia, PM₁₀ samples were collected during December 2010. Diagnostic PAH concentration ratios were used as a tool to identify and characterize the PAH sources. The results reflect high PM₁₀ and PAH concentrations (particulate matter (PM)?=?270–1,270 μg/m³). The corresponding average PAH concentrations were in the range of 18?±?8 to 1,003?±?597 ng/m³ and the total concentrations (total PAHs (TPAHs) of 17 compounds) varied from 1,383 to 13,470 ng/m³ with an average of 5,871?±?2,830 ng/m³. The detection and quantification limits were 1–3 and 1–10 ng/ml, respectively, with a recovery range of 42–80 %. The ratio of the sum of the concentrations of the nine major non-alkylated compounds to the total (CPAHs/TPAHs) was 0.87?±?0.10, and other ratios were determined to apportion the PM sources. The PAHs found are characteristic for emissions from traffic with diesel being a predominant source.     

Green synthesis of silver nanoparticles by microorganism using organic pollutant: its antimicrobial and catalytic application

A novel approach for the green synthesis of silver nanoparticles (AgNPs) from aqueous solution of AgNO₃ using culture supernatant of phenol degraded broth is reported in this work. The synthesis was observed within 10 h, and AgNPs showed characteristic surface plasmon resonance around 410 nm. Spherical nanoparticles of size less than 30 nm were observed in transmission electron microscopy. X-ray diffraction pattern corresponding to 111, 200, 220, and 311 revealed the crystalline nature of the as-formed nanoparticles. It was found that the colloidal solution of AgNP suspensions exhibited excellent stability over a wide range of ionic strength, pH, and temperature. The effect of pH and ionic strength indicated that stabilization is due to electrostatic repulsion arising from the negative charge of the conjugate proteins. The AgNPs showed highly potent antimicrobial activity against Gram-positive, Gram-negative, and fungal microorganisms. The as-prepared AgNPs showed excellent catalytic activity in reduction of 4-nitrophenol to 4-aminophenol by NaBH₄. By manufacturing magnetic alginate beads, the reusability of the AgNPs for the catalytic reaction has been demonstrated.